Gone were the days when Malacca was perhaps the only place to have mille crepe. Now, there are couple of cafes that offer the almost similar legendary dessert in Klang Valley. And this is one of them which was opened not long ago. It is said that this particular one is by the person (and/or originator) who made the dessert famous in Malaysia.

Humble Beginnings, Bangsar Baru

For first timers, it is tough to locate this cafe due to its tiny occupied vicinity. But fret not as it is located right beside Subway restaurant. There are very few seats in the cafe and even fewer selections of desserts available than I first thought it would have.

Inside of Humble Beginnings Cafe

You will be disappointed if you would to compare them with the selection you see from their website. The usual ones like Vanilla, Coffee and Chocolate are on the menu but let’s hope that they expand their menu in near future.

French Vanilla Mille Crepe by Humble Beginnings

Since choices were limited, we opted for each of French Vanilla (RM9.90) and Coffee Bliss (RM9.90) flavour. Texture wise, we found that the crepes were a little thicker than the ones in Malacca. It was harder to cut through with given fork.

Coffee Bliss Mille Crepe by Humble Beginnings

Maybe they had been sitting in the fridge for quite some time which made the crepe to harden a little bit, I don’t know. But in terms of flavour, it was still as good as it supposed to be. The taste of vanilla and coffee was subtle but yet able to impart their iconic essence.

Humble Beginnings, Bangsar Baru

All in all, they were good. Just that the thickness that got us wondering if this is normal. Nevertheless, one would not need to go that far off for a good slice of mille crepe anymore as there are plenty of choices in Kuala Lumpur now!

Address :
No. 30, Jalan Telawi,
Bangsar Baru,
59100 Kuala Lumpur.

Telephone Number : +603 2282 8035

Business Hours : 10AM – 10PM




Since I do not have to splurge more money on extra lenses for the camera, the money I saved pretty much ended up at pimping (customisation) department. There are plenty of accessories out there which opens the door wide to endless customisation. From grips to soft release shutter buttons, casing to straps, it is up to one’s preference on how they (in this case, me!) wants their camera to look like. Long story short, here are the items I bought for my camera;

Lance Camera Strap

Lance Camera Strap

Although 2 leather straps were provided when I purchased the camera (and not forgetting the current one – Crumpler Popular Disgrace), somehow the urge is there to get something else that fits the camera’s profile and my preference. I do not really fancy leather straps because they tend to get really uncomfortable when hot weather strikes! I did use the Crumpler camera strap temporary but somehow, the colour scheme does not match with the camera’s.

So, I knew from there on that I needed something soft yet durable which I am able to use it for long hours without feeling icky about it. I scourged through some forums and blogs and after a long search, I finally took a plunge to get this strap – Lance Camera Strap – which is relatively unknown compared to other well known ones such as Artisan & Artist. However, rest assured that the quality of this product is top notch!

Lance Camera Strap for Fujifilm Finepix X100

There are a few cord lengths and ring colours to choose from and the purchasing process was fast and easy with an option to include O-Ring Strap Bumpers (to protect the camera’s body from scratches / wear-and-tear). It took about approximately 2 weeks to arrive to my location (Malaysia). I chose a 48 inch non-adjustable strap with red orange rings and bumpers and all I can say is it is good stuff at fraction of the price! The cord is adequately thick to withhold the weight / strength yet I am still able to wrap around my wrist easily and rest around the neck comfortably. Besides that, I chose this length because I prefer the camera to rest on my stomach rather than on my chest and I can sling across my body easily.

Zhou Soft Release Button

Zhou Soft Release Shutter Button for Fujifilm Finepix X100

The shutter button of the camera is kinda small. But with a soft release button ‘installed’, it made all easier to press the button. Seriously! And it looks nicer too! The downside of this is that it gets loose easily and the paint will chipped off when it falls from higher ground.

GGS LCD Screen Protector

By now, it is recommended to get a screen protector to urm… protect the LCD screen from accidental scratches. As of writing this, there is no proper fit for Fujifilm Finepix X100’s LCD screen. I have read a couple of reviews from forums mentioning about this (GGS LCD Screen Protector). And again, I took a plunge to get a 3.0” and walla, it turned out to be perfectly fine! I mean, it is bigger than the screen but it covers the screen nicely plus the sides of the screen.

Marumi UV Filter

Although it is not a must to get a UV filter, but being the clumsy one isn’t worth the risk. Besides that, with the hood installed, there is no way to use the provided lens cap to protect the lens during storage. There are limited selections to choose from because of its unusual size (read : small). This one by Marumi does the job… and it is wallet-friendly too. The other option to protect the lens is to get a third party lens cover, the ones used by Canon, Nikon, Sony, Sigma and etc.

Fujifilm AR-X100 Lens Adapter and LH-X100 Hood

Just like LCD screen protector, they are yet another automatic purchase when getting camera. There is an option to get a third party from other brand, which costs almost half of the original’s price, but I was told that the hood tends to fall off easily. Therefore, although the original ones are pricey compared to the third party unit, they are definitely worth the price. Sexiness +100

Grip Case by J.B. Camera Designs

Grip Case by J.B. Camera Designs for Fujifilm Finepix X100

Leaving the camera bare naked is perfectly fine. It exhibits the carefully crafted, aesthetic beauty of the camera. But it is perfectly fine to have a lil protection too, especially the bottom part of the camera since it is the only area that will be in contact with other (rough, maybe) surface most of the time. While most opted for leather half case, I chose this due to some reason; i.e. durability and price factor. There are few colours to choose from and it’s no brainer that I chose black but I was really tempted to get the striking orange.

Grip Case by J.B. Camera Designs for Fujifilm Finepix X100

What I like about this case is how robust it looks and how it was carefully designed to snugly fit the camera. Besides that, there is quick access to the battery and memory card compartment. Despite its flexibility, the grip case ‘clamps’ nicely to the camera body without having tiny space in between. The flexibility is designed as such as it adds to its durability and does not damage the camera by being too rigid (could scratch when taking it on and off the camera).

Grip Case by J.B. Camera Designs for Fujifilm Finepix X100

However, that said, due to occupancy of a stainless steel screw that secures the case to the camera via the tripod socket, one needs to remove the case if there is a need to mount the camera to a tripod (mainly for night photography).

Lowepro Terraclime 50

Lowepro Terraclime 50 Camera Bag

This is probably the best fit for the camera (for me at least). There are 3 small compartments in the bag for battery / memory card storage. Instead of Velcro system, a hook mechanism is used for this bag. It fits snugly without leaving any extra space for other items. Try to get Terraclime 100 if you are going to store more things in the bag. Although it is discontinued model, you can still get it from eBay or Amazon.